Show Rmon Event - Avaya G450 Cli Reference Manual

CLI Commands

show rmon event

Use the show rmon event command to display information about existing RMON event
entries. If no index is specified, information for all events is displayed.
Syntax
show rmon event [event_index]
Parameters
Parameter
event_index
User Level
read-only
Context
general
Example
To display RMON event information for all events:
G450-001(super)# show rmon event
Event 32 is active, owned by config
Description is resetTrap
Event firing causes trap to community public, last fired 0:0:0
Related Commands
clear rmon statistics,
history, show rmon statistics
876 Avaya G450 CLI Reference
Description
The index of the event about which to
display information
rmon alarm, rmon event, rmon history, show rmon
RMON monitoring
Possible Default
Values Value
alarm, show rmon