Set Supervision - Avaya G450 Cli Reference Manual

Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
set japan-disconnect,
numbering-format,
(trunk-group), show

set supervision

Use the set supervision command to define the incoming signaling supervision mode for
analog DID trunks or DS1 tie trunks only in SLS.
Syntax
set supervision sup-type
Parameters
Parameter
sup-type
* For TIE trunks you must specify both the incoming and outgoing modes. For example, wink-immediate
requires the DS1 interface to use wink supervision to answer an incoming call and use an immediate
seizure protocol for outbound calls.
User Level
read-write
Context
sls > trunk-group
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set cbc,
set send-name, set
sls, show trunk-group
Description
For analog-did group types:
The incoming signaling supervision
mode for analog DID trunks
For t1inband and e1inband group
types:
Signaling supervision for the
non-ISDN digital trunks
remove port, set cbc,
set codeset-display,
set incoming-destination,
set cbc-parameter,
supervision, set tac,
sls, trunk-group
Possible Values
immediate
wink
loop-start
ground-start
wink-wink
*
wink-immediate
wink-auto
immediate-immediate
auto-auto
auto-wink
SLS survivability
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set cbc-service-feature,
set trunk-hunt, set sls,
Issue 1 January 2008
set dial,
set
show
Default
Value
wink
wink-wink
1059