System identification
set system contact
Use the set system contact command to set the contact information for this media
gateway system.
Syntax
set system contact [string]
Parameters
Parameter
string
User Level
read-write
Context
general
Example
To set the contact information of the system to Larry Williams:
G450-001# set system contact "Larry Williams"
*** Set system contact ***
system contact set
Related Commands
set system
location,
Description
The contact name string should be typed inside
double quotes.
The name is cleared if you leave this field blank.
set system name
System identification
Possible
Default
Values
Value
Issue 1 January 2008
1133