Voip Testing; Busyout Voip-Dsp - Avaya G450 Cli Reference Manual

CLI Commands

VoIP testing

busyout voip-dsp

Use the busyout voip-dsp command to put the VoIP entity in busyout (not available) state.
This is recommended before starting a Bit Transfer Rate test.
Note:
Status changes made during the Bit Transfer Rate test create SNMP traps.
Note:
Syntax
busyout voip-dsp [dsp-id[/core-id]]
Parameters
Parameter
dsp-id
core-id
User Level
read-write
Context
general
Example
To busyout DSP childboard #3:
G450-001(super)# busyout voip-dsp 3
To busyout DSP childboard # 1, Core 2:
G450-001(super)# busyout
Related Commands
campon-busyout
voip-parameters,
1198 Avaya G450 CLI Reference
Description
The slot number of the VoIP DSP
childboard
The core ID
voip-dsp 1/2
voip-dsp, release voip-dsp,
test voip-dsp
Possible
Values
1-4
1-4
reset voip-dsp, show voip-dsp,
VoIP testing
Default
Value
show