Set Bearer-Capability - Avaya G450 Cli Reference Manual

CLI Commands

set bearer-capability

Use the set bearer-capability command to set the Information Transfer Rate field of the
Bearer Capability IE in SLS.
Note:
This command is only valid for a DS1 or BRI circuit employed with ISDN.
Note:
Syntax
set bearer-cability bearer
Parameters
Parameter
bearer
User Level
read-write
Context
sls > ds1
sls > bri
Example
To set the Information Transfer Rate field to speech for DS1:
G450-001 (sls-ds1-<port address>)# set bearer-capability speech
To set the Information Transfer Rate field to speech for BRI:
G450-001 (sls-bri-<port address>)# set bearer-capability speech
Related Commands
clear ds1, set
set interface-companding,
signaling-mode,
964 Avaya G450 CLI Reference
Description
The Information Transfer Rate field of the
Bearer Capability IE:
3khz – 3.1kHz audio encoding
●
speech – Speech encoding
●
bit-rate, set channel-numbering,
set long-timer,
set sls, show (ds1),
set connect,
set name, set protocol-version,
show ds1, show sls, sls
SLS survivability
Possible
Values
3khz
speech
set country-protocol, set
set side,
Default
Value
speech
interface,
set