Snmp-Server Group - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

snmp-server group

Use the snmp-server group command to define a new SNMPv3 group, or to configure
settings for the group. An SNMP group associates users with views. Use the no form of the
command to remove the specified group.
Note:
If you use the no form of the command with no additional parameters, all
Note:
instances of the specified group are removed. If you specify a particular security
group, only that group instance is removed.
Syntax
snmp-server group groupname {v1|v2c|{v3 level}} [read read-view]
[write write-view] [notify notify-view]
no snmp-server group groupname [v1|v2c|{v3 level}]
Parameters
Parameter
groupname
v1
v2c
v3
level
1080 Avaya G450 CLI Reference
Description
A character string specifying the group
name
Keyword indicating that the group is
limited to SNMP v1 functionality
Keyword indicating that the group is
limited to SNMP v2c functionality
Keyword indicating that the group has
full SNMP v3 functionality.
This is the default.
The group's level of authentication
SNMP access configuration
Possible Values
A string of up to 32
characters
auth – the group
authenticates
packets
noauth – the group
does not
authenticate packets
priv – the group
authenticates and
encrypts packets
Default
Value
noauth