Frame-Relay Lmi-Type - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
clear frame-relay
interface-dlci,
frame-relay priority-dlci-group,
bc out, be out,
interfaces, show

frame-relay lmi-type

Use the frame-relay lmi-type command to manually define the type of the Local
Management Interface (LMI) to use.
Use the no form of this command to specify automatic detection of the LMI type (auto-sensing).
If auto-sense fails, ANSI is used as the default.
Syntax
[no] frame-relay lmi-type lmi_type
Parameters
Parameter
lmi_type
User Level
read-write
Context
interface:Serial (DS1 FR L2, USP FR L2)
Example
To select the q933a LMI type:
G450-001(if:Serial 3/1:1)# frame-relay lmi-type q933a
422 Avaya G450 CLI Reference
counters, interface
frame-relay lmi-n391dte,
frame-relay
cir out, fragment, show frame-relay
traffic-shape, GRE
Description
The type of local
management
interface
serial, encapsulation,
frame-relay lmi-n392dte,
traffic-shaping,
map, show frame-relay pvc
tunneling, show traffic-shape-statistics
Possible Values
ansi - LMI according to ANSI T1.617 [9]
q933a - LMI according to ITU-T Q.933 [7]
autosense
lmi-rev1
disable
Frame relay encapsulation
frame-relay class-dlci,
frame-relay lmi-type,
ip address, map-class
brief,
frame-relay
frame-relay,
show
Default
Value