Keepalive-Icmp Failure-Retries - Avaya G450 Cli Reference Manual

CLI Commands
Syntax
[no] keepalive-icmp dest_ip_address next_hop_mac_address
Parameters
Parameter
dest_ip_address
next_hop_
mac_address
User Level
read-write
Context
interface:FastEthernet
Example
To enable ICMP keepalive on the FastEthernet 10/2 interface for destination IP address
135.64.2.12 using MAC 11.22.33.44.55.66:
G450-001(if:FastEthernet 10/2)# keepalive-icmp 135.64.2.12 11.22.33.44.55.66
Related Commands
keepalive-icmp
keepalive-icmp

keepalive-icmp failure-retries

Use the keepalive-icmp failure-retries command to set the number of consecutive
failed keepalive packets necessary to set the interface's keepalive status as down. Using this
command without a parameter resets the failure-retry value to the default value.
Syntax
keepalive-icmp failure-retries failure-retries-number
458 Avaya G450 CLI Reference
Description
The destination address whose status is
being monitored
The next hop address for the keepalive
packets. This parameter is only relevant
for the WAN FastEthernet port.
failure-retries, keepalive-icmp
success-retries, keepalive-icmp
interval, keepalive-icmp
timeout, show keepalive-icmp
ICMP keepalive
Possible Default
Values Value
source-address,