Set Cor - Avaya G450 Cli Reference Manual

CLI Commands
Sub-commands
Depending on the class of station, the following sub-commands are available:
Additional SLS commands
set sls, show (station),

set cor

Use the set cor command to administer the class-of-restriction values for each station that
uses SLS.
Syntax
set cor cor
Parameters
Parameter
cor
* As the class of restriction moves from "emergency" to "unrestricted," each level increases the range of
dialing abilities for this station. For example, "toll" level includes "local," "internal," and "emergency."
1020 Avaya G450 CLI Reference
Command
set cor
set expansion-module
set name
set password
set port
set swhook-flash
set trunk-destination
set type (station)
show (station)
show sls, sls
Description
The class of restriction for a station user's
dialing
Analog DCP IP
X X
X
X X
X
X X
X
X X
X X
X X
Possible
Values
emergency
internal
local
toll
unrestricted
SLS survivability
X
X
X
X
X
X
X
Default
*
Value
internal