Set Signaling-Mode - Avaya G450 Cli Reference Manual

Related DS1 commands
clear ds1, set bearer-capability,
country-protocol,
protocol-version,
Related BRI commands
bri, clear bri, set
directory-number-b,
set name, set spid-a,

set signaling-mode

Use the set signaling-mode command to set the signaling mode for the DS1 facility in SLS.
Note:
This command is only valid for DS1.
Note:
If this command is invoked to change the transmission rate and the DS1 facility
and associated signaling group have already been provisioned, the command is
blocked and a warning message, "Administrative change is in violation with
existing trunk member provisioning", is displayed.
Syntax
set signaling-mode mode-type
set bit-rate,
set interface, set interface-companding,
set signaling-mode, set
bearer-capability, set
set endpoint-init, set
set spid-b, set sls,
set channel-numbering,
set
sls, show (ds1), show
country-protocol, set directory-number-a,
interface, set interface-companding,
set tei-assignment,
SLS survivability
set connect, set
long-timer, set name,
ds1, show sls, sls
set
set layer1-stable,
show (bri), show bri, show
Issue 1 January 2008
set
sls, sls
977