Avaya G450 Cli Reference Manual page 690

CLI Commands
Parameter
icmp_type
icmp_code
User Level
read-write
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule, ip
crypto-list ip-rule
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 27 applies to ICMP error-reply packets:
G450-001(ACL 333/ip rule 27)# icmp Echo-Reply
To specify that rule 33 applies to any ICMP packet type except type 1 code 2:
G450-001(ACL 333/ip rule 33)# not icmp 1 2
Related Commands - Policy-based routing
destination-ip,
capture-list, source-ip,
source-port
Related Commands - Policy
composite-operation, cookie, destination-ip,
policy-based routing, packet
show isdn bri link,
destination-port,
Related Commands - VPN
description (ip
ip crypto-list, ip-protocol,
crypto-list, tcp
690 Avaya G450 CLI Reference
Description
Specify that the rule
applies to this icmp type
Specify that the rule
applies to this icmp code
dscp (policy-based routing, packet sniffing,
tcp destination-port,
sniffing), owner,
show list, source-ip,
udp source-port
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
destination-port, tcp source-port,
Possible Values
For an ip-rule: 0-256
For a QoS rule: 0-65535
For an ip-rule: 0-256
For a QoS rule: 0-65535
VPN), ip-protocol,
tcp source-port,
dscp (policy), dscp-table, icmp,
show composite-operation,
tcp destination-port, tcp
protect crypto
udp destination-port,
Policy - access control lists
Default
Value
show ip
udp destination-port, udp
ip-rule (policy,
show dscp-table,
established, tcp source-port,
VPN), fragment,
map, source-ip,
udp source-port
udp
show ip