CLI Commands
Parameters
Parameter
non_cyclic
cyclic
User Level
read-write
Context
general
Example
To specify that the packet sniffer uses cyclic buffer-mode:
G450-001(super)# capture buffer-mode cyclic
Related Commands
capture
buffer-size,
max-frame-size, capture-service,
capture-buffer,
capture buffer-size
Use the capture buffer-size command to specify the maximum size of the packet sniffing
buffer.
Note:
To activate the change in buffer size, you must run copy running-config
Note:
startup-config, and reboot the device.
Syntax
capture buffer-size buffer_size
636 Avaya G450 CLI Reference
Description
Keyword specifying a linear buffer that is used
until it is filled up
Keyword specifying a circular buffer that
overwrites the oldest records when it is filled up.
Use a cyclic buffer to store the most recent
history of packet activity.
capture
filter-group,
capture
ip
capture-list, name,
capture
interface,
capture
start,
capture
stop, capture-service,
show
capture,
show capture-buffer hex
Packet sniffing
Possible
Default
Values
Value
ipsec,
capture
clear