Loopback - Avaya G450 Cli Reference Manual

loopback

Use the loopback command to put a T1 or E1 line into loopback mode. Use the no form of the
command to disable loopback mode.
Syntax
For an E1 line:
loopback {[local {line | payload}] | diag}
no loopback
For a T1 line:
loopback {[local {line | payload}] | diag | [remote {line | payload}]}
no loopback
Parameters
Parameter
local
line
payload
diag
remote
User Level
read-write
Context
interface:Controller
Description
Keyword indicating that the controller loop
the internal transmit signal back to the
internal receive signal
Keyword indicating that the controller loop
the external line signal back toward the
network without reframing the DS1 signal
Keyword indicating that the controller loop
the external line signal back toward the
network and reframes the DS1 signal
Keyword indicating that a loopback to the
device is in place
Keyword indicating to create either a remote
payload or a remote line loopback. Only in
esf framing.
E1/T1 interfaces
Possible Default
Values Value
Issue 1 January 2008 367