Lldp; Set Lldp Re-Init-Delay - Avaya G450 Cli Reference Manual

LLDP

set lldp re-init-delay

Use the lldp re-init-delay command to set the delay from when a port is set to LLDP
disable until re-initialization is attempted.
Syntax
set lldp re-init-delay value
Parameters
Parameter
value
User Level
read-write
Context
general
Example
To set the re-initialization delay to 5 seconds:
G450-001(super)# set lldp re-init-delay 5
Related Commands
set lldp system-control,
lldp, set port lldp
config
Description
The delay in seconds from when a port is set to
LLDP disable until re-initialization will be
attempted
set lldp tx-delay,
tlv, show lldp, show lldp
set lldp tx-hold-multiplier,
config, show port lldp
Possible Default
Values Value
1-10 2
set lldp tx-interval,
config, show port lldp vlan-name
Issue 1 January 2008
LLDP
set port
531