Ds1 - Avaya G450 Cli Reference Manual

CLI Commands
Field
Trunk group
Delete/Insert Digits
Related Commands
bri, dial-pattern,

ds1

Use the ds1 command within the
administering DS1 trunks for SLS. After issuing this command, the prompt changes to
sls-ds1-<port-address>
Syntax
ds1 slot-address
Parameters
Parameter
slot-address
Note:
The DS1 port address must agree with the slot assignment administration (see
Note:
set slot-config
Table 110: G450 slot and board matrix for SLS
G450 Media
Module
MM710
User Level
read-write
962 Avaya G450 CLI Reference
Description
The trunk-group number
The number of digits to add or remove from a dialed string
ds1 incoming-routing,
,
sls context to enter a second-level subcontext for
. Type exit to leave the DS1 context, and return to the
Description
The physical module address
on the gateway
on page 992).
Description
One T1/E1 trunk port
set sls, show sls, sig-group, station, sls,
Possible Values
G450:
Permitted
slots
v1, v2, v3, v4, v5
SLS survivability
2 of 2
trunk-group
sls
Default
Value
Table 110
SLS
configured?
Yes
context.