Avaya G450 Cli Reference Manual page 834

CLI Commands
Current priority queue configuration:
Interface Name
Serial 3/1
Serial 4/1:1
Current voip fair queue configuration:
Interface
Name
Serial 3/1:1
Output fields
Field
VOIP
Est. Delay [ms]
Q.1
Q.2
Q.3
Q.4
Total discard
threshold
Flow discard
threshold
Dynamic queues
Max voip delay [ms]
Priority queues
834 Avaya G450 CLI Reference
VOIP Est. Delay
[ms]
OFF OFF
OFF OFF
Total Flow
discard discard
threshold threshold
256 64
Description
Indicates if VoIP queueing is enabled. VoIP queueing is
enabled using the voip-queue command.
If VoIP queueing is enabled, displays the maximum queue
delay for which to estimate the high priority queue size
necessary to meet the queueing delay for a specific VoIP
codec. By default, this is estimated for the G.729 codec and is
20 ms. It can be configured through the voip-queue-delay
command. If VoIP queueing is not enabled, the Est. Delay
column displays OFF.
The size, in packets, of the highest priority queue
The size, in packets, of the second highest priority queue
The size, in packets, of the second lowest priority queue
The size, in packets, of the lowest priority queue
The total buffer credits limit for WFQ. Configurable through the
fair-queue-limit command.
Per subqueue buffer credits. Not configurable.
The total number of subqueues. Not configurable.
Maximum delay for VoIP bearer
The number of priority queues in the system. Not configurable.
From the user's point of view control and bearer queues are
the same queue.
Q.1(High) Q.2
524 524
507 507
Dynamic Max voip
Queue delay (ms)
16 20
Priority queueing
Q.3 Q.4(Low) DE Buf
524 524 -
507 507 507
Priority
queues
1