Show Rmon History - Avaya G450 Cli Reference Manual

show rmon history

Use the show rmon history command to display information about existing history entries.
If no index is specified, information for all history entries is displayed.
Syntax
show rmon history [history_index]
Parameters
Parameter
history_index
User Level
read-only
Context
general
Example
To display RMON history information for entry 32:
G450-001(super)# show rmon history 32
history
Entry 32 is active, owned by config
Monitors the port 10/2 every 20 seconds
Requested # of time intervals, ie buckets, is 100
Granted # of time intervals, ie buckets, is 100
Sample # 47 began measuring at 8:32:17
Received 664636 octets, 1912 packets,
2 broadcast and 0 multicast packets,
0 undersize and 0 oversize packets,
22 fragments and 0 jabbers,
0 CRC alignment errors and 3 collisions,
# of dropped packet events (due to a lack of resources): 0
Network utilization is estimated at 0
Related Commands
clear rmon statistics,
event, show rmon statistics
Description
The history entry about which to display information
rmon alarm, rmon event, rmon history, show rmon
RMON monitoring
Possible Default
Values Value
alarm, show rmon
Issue 1 January 2008 877