CLI Commands
Related Commands
encapsulation
pppoe-client persistent
pppoe-client wait-for-ipcp
ppp chap refuse
Use the ppp chap refuse command to prevent authentication with CHAP, even when a
chap secret is configured. Use the no form of this command to allow authentication with CHAP.
Syntax
[no] ppp chap refuse
User Level
read-write
Context
interface:FastEthernet, Dialer (L2, L2-L3)
Example
To prevent authentication with CHAP:
G450-001(super-if:FastEthernet 10/2)# ppp chap refuse
Related Commands
ppp pap refuse
ppp ipcp dns request
Use the ppp ipcp dns request command to enable requesting DNS information from the
remote peer during the PPP/IPCP session. Use the no form of this command to restore the
default value, which is not to request DNS information during the PPP/IPCP session.
Note:
The DNS Resolver uses the DNS servers discovered using this command.
Note:
Syntax
ppp ipcp dns request
no ppp ipcp dns
824 Avaya G450 CLI Reference
pppoe,
interface
fastethernet, mtu,
delay,
pppoe-client persistent
PPPoE (PPP over Ethernet)
ppp chap
hostname,
ppp pap
max-attempts,
pppoe-client
sent-username,
service-name,