Show Port Vlan-Binding-Mode - Avaya G450 Cli Reference Manual

CLI Commands

show port vlan-binding-mode

Use the show port-vlan-binding command to display port VLAN binding mode
information. If no module number is specified, information for all ports on all modules is
displayed. If no port number is specified, information for all ports on the specified module is
displayed.
Syntax
show port vlan-binding-mode [module[/port]]
Parameters
Parameter
module
port
User Level
read-only
Context
general
Example
To display VLAN binding information for all ports:
G450-001(super)# show port vlan-binding-mode
port 10/5 is statically bound
port 10/6 is statically bound
Related Commands
clear port static-vlan,
port vlan-binding-mode,
trunk, show vlan
1190 Avaya G450 CLI Reference
Description
The number of the module
The number of the port on the module. You can
also specify a range of ports, for example,
10/5-6 for both ETH LAN ports 5-6 on the front
panel.
clear vlan, icc-vlan,
set trunk, set vlan,
interface vlan, set port
show cam vlan, show port
VLAN configuration
Possible Default
Values Value
static-vlan, set port vlan,
vlan-binding-mode,
set
show