Ip Address Negotiated - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Example
To set the maximum time the dialer waits between dialing a number to successfully establishing
PPP/IPCP to 10 seconds:
G450-001(if:Dialer 1)# dialer wait-for-ipcp 10
Related Commands
interface dialer,
dialer persistent initial
string

ip address negotiated

Use the ip address negotiated command to enable obtaining an IP address via
PPP/IPCP negotiation. Use the no form of this command to disable IP address negotiation.
Note:
The ip address negotiated command is intended primarily for PPPoE and
Note:
dialer modem.
Note:
When you release a negotiated IP address using no ip address
Note:
negotiated, any DNS information is removed as well.
Note:
You cannot configure both DHCP address negotiation and PPP/ICMP address
Note:
negotiation on the FastEthernet interface.
Syntax
[no] ip address negotiated
User Level
read-write
Context
interface:FastEthernet (PPP L2-L3), Dialer (L2-L3)
332 Avaya G450 CLI Reference
dialer modem-interface,
delay, dialer persistent
dialer order, dialer persistent,
max-attempts, dialer persistent
Dialer interface
dialer persistent delay,
re-enable, dialer