Set Send-Number - Avaya G450 Cli Reference Manual

CLI Commands

set send-number

Use the set send-number command to define whether or not the calling, connected, called,
or busy party's administered number is sent to the network on outgoing or incoming calls in
SLS.
Note:
Leave the setting of method to be no, since sending a Calling Party Number is a
Note:
future feature.
Note:
This command only applies to ISDN trunks.
Note:
Syntax
set send-number method
Parameters
Parameter
method
User Level
read-write
Context
sls > trunk-group
Example
To define that the calling, connected, called, or busy party's administered number is sent to the
network on outgoing or incoming calls:
G450-001 (sls-trunk-group-<tgnum>)# set send-number yes
1058 Avaya G450 CLI Reference
Description
Specifies whether or not the calling, connected,
called, or busy party's administered number is sent
to the network on outgoing or incoming calls:
yes – The number is sent to the network for
●
incoming or outgoing calls
no – The number is not sent to the network
●
for incoming or outgoing calls
restricted – The number is sent to the
●
network as 'Presentation restricted'
SLS survivability
Possible Default
Values Value
yes no
no
restricted