Pppoe (Ppp Over Ethernet); Interface Fastethernet - Avaya G450 Cli Reference Manual

CLI Commands
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 input drops, 0 output drops, 0 unknown protocols
0 packets input, 0 bytes
0 broadcasts received, 0 giants
0 input errors, 0 CRC
0 packets output, 0 bytes
0 output errors, 0 collisions
Console asynchronous mode is terminal
Terminal baud rate is 9600
Related Commands - Frame relay encapsulation
clear frame-relay
fragment, show frame-relay pvc brief
Related Commands - PPP encapsulation
interface dialer,
Related Commands - Verifying WAN configuration
show controllers,
show frame-relay

PPPoE (PPP over Ethernet)

interface FastEthernet

Use the interface FastEthernet command to enter Interface FastEthernet configuration
mode. Use the no form of this command to delete an IP interface.
If the specified interface does not exist, the system creates it and enters its configuration mode.
Syntax
[no] interface FastEthernet [module/port[.ip_interface]]
818 Avaya G450 CLI Reference
counters, frame-relay
interface fastethernet,
show frame-relay fragment,
traffic, show interfaces,
class-dlci, interface serial,
interface serial
show frame-relay
show ip interface, show map-class frame-relay
PPPoE (PPP over Ethernet)
map-class frame-relay,
lmi, show frame-relay pvc,