Set Cbc-Parameter - Avaya G450 Cli Reference Manual

Parameters
Parameter
yes
no
User Level
read-write
Context
sls > trunk-group
Example
To specify that the ISDN trunk group will declare the service type explicitly:
G450-001 (sls-trunk-group-<tgnum>)# set cbc yes
Related Commands
add port, clear
set channel-preference,
digit-handling, set
japan-disconnect,
supervision, set
trunk-group

set cbc-parameter

Use the set cbc command to define what class of service is being specified, as part of the
scocs service in the Network Services Facility information element sent to the network service
provider on outgoing calls in SLS.
Note:
This command only applies to ISDN Primary Rate trunks
Note:
Description
Keyword indicating that the SLS Q.931
state machine will define the service
type in the Network Specific Facilities
information element that is sent with the
SETUP message on outbound calls
Keyword indicating that the Network
Specific Facilities information element
will not be sent. This is the default
value.
tac, clear trunk-group,
set codeset-display,
digit-treatment, set
set name, set numbering-format,
tac, set trunk-hunt, set
remove port, set cbc-parameter,
set codeset-national,
incoming-destination,
set send-name,
sls, show (trunk-group),
SLS survivability
Possible Values
set cbc-service-feature,
set dial, set digits,
set incoming-dialtone,
set send-number,
show sls, show trunk-group
Issue 1 January 2008
Default
Value
set
set
set
sls,
1041