Show Capture - Avaya G450 Cli Reference Manual

User Level
read-write
Context
ip access-control-list, ip qos-list, ip capture-list, ip pbr-list, ip crypto-list
Example
To set the owner of access control list 330 as MGAdmin3:
G450-001(ACL 330)# owner MGAdmin3
Related Commands - Packet sniffing
composite-operation, cookie,
ip-rule (policy, policy-based routing, packet
Related Commands - Policy-based routing
ip-rule (policy, policy-based routing, packet
Related Commands - Policy
composite-operation, cookie, dscp-table, ip-fragments-in, ip-option-in,
policy-based routing, packet
show list

show capture

Use the show capture command to display information about the currently configured
settings for the packet sniffing service.
Note:
Timestamps in the capture file are based on the capture start time that is
Note:
displayed in the output of the show capture command.
Syntax
show capture
User Level
read-only
Context
general
copy capture-file ftp,
sniffing),
sniffing), name,
sniffing), name, show
copy capture-file scp,
show ip capture-list,
show isdn bri
ip-rule (policy,
composite-operation,
Issue 1 January 2008
Packet sniffing
copy capture-file tftp,
show upload status
link, show list
show isdn bri link,
671