Avaya G450 Cli Reference Manual page 970

CLI Commands
Parameters
Parameter
glare-mode
User Level
read-write
Context
sls > ds1
sls > bri
Example
To specify the glare-handling convention as network:
G450-001 (sls-ds1-<port address>)# set interface network
Related DS1 commands
clear ds1, set
country-protocol,
side, set signaling-mode,
Related BRI commands
bri, clear bri, set
directory-number-b,
side, set spid-a,
970 Avaya G450 CLI Reference
Description
The glare-handling convention for a DS1 or BRI
link.
For non-QSIG calls:
network – If the gateway is connected to a
●
host computer and encounters glare, it
overrides the far-end
user – If the gateway is connected to a
●
public network and encounters glare, it
releases the circuit
For QSIG calls:
peerMaster – SLS overrides the other end
●
when glare occurs
peerSlave – SLS releases the circuit when
●
glare occurs
bearer-capability, set
set interface-companding,
set sls, show
bearer-capability, set
set endpoint-init,
set spid-b, set sls, set
bit-rate, set channel-numbering,
set long-timer,
ds1, show sls, sls
country-protocol, set
set interface-companding,
tei-assignment, show
SLS survivability
Possible
Values
network
user
peerMaster
peerSlave
set connect,
set name, set protocol-version,
directory-number-a, set
set layer1-stable,
(ds1), show bri, show
Default
Value
user
set
set
set name, set
(bri), sls