Keepalive-Icmp Timeout; Show Keepalive-Icmp - Avaya G450 Cli Reference Manual

CLI Commands

keepalive-icmp timeout

Use the keepalive-icmp timeout command to set the timeout (in seconds) for receiving
the keepalive response. Using this command without a parameter resets the timeout value to
the default value.
Syntax
keepalive-icmp timeout timeout
Parameters
Parameter
timeout
User Level
read-write
Context
interface:FastEthernet
Example
To set the timeout for receiving the keepalive response to 1 second:
G450-001(if:FastEthernet 10/2)# keepalive-icmp timeout 1
Related Commands
keepalive-icmp,
source-address,

show keepalive-icmp

Use the show keepalive-icmp command to display information about the extended
keepalive settings.
Syntax
show keepalive-icmp
462 Avaya G450 CLI Reference
Description
The number of seconds to wait for a
response
keepalive-icmp failure-retries,
keepalive-icmp success-retries,
Possible
Values
1-10
keepalive-icmp interval,
show keepalive-icmp
ICMP keepalive
Default
Value
1
keepalive-icmp