Frame-Relay Lmi-N391Dte - Avaya G450 Cli Reference Manual

User Level
read-write
Context
interface:Serial (DS1 FR-SUB L2, DS1 FR-SUB L2-L3)
Example
The following example creates and associates DLCI number 17 with the current sub-interface.
This VC will carry all traffic (if no priority dlci-group is defined for this interface), and will be in the
primary role.
G450-001(super-if:Serial 3/1:1)# frame-relay interface-dlci 17
Related Commands
clear frame-relay
lmi-n391dte, frame-relay
frame-relay priority-dlci-group,
bc out, be out,
interfaces, show

frame-relay lmi-n391dte

Use the frame-relay lmi-n391dte command to set the number of status enquiry intervals
that pass before issuing a full status enquiry message.
Use the no form of this command to set the number of status enquiry intervals to its default.
Syntax
[no] frame-relay lmi-n391dte polling_counter
Parameters
Parameter
polling_
counter
User Level
read-write
counters, interface
lmi-n392dte,
frame-relay
cir out, fragment, show frame-relay
traffic-shape, GRE tunneling,
Description
Number of status enquiry intervals
serial, encapsulation,
frame-relay lmi-n393dte,
traffic-shaping,
map, show frame-relay pvc
show traffic-shape-statistics
Frame relay encapsulation
frame-relay class-dlci,
frame-relay lmi-type,
ip address, map-class
brief,
Possible
Values
1-255
Issue 1 January 2008
frame-relay
frame-relay,
show
Default
Value
6
419