Async Modem-Init-String - Avaya G450 Cli Reference Manual

CLI Commands
The default settings for the USB interface are:
Interface status
IP address
Netmask
timeout
PPP speed
Async
modem-init-string
Syntax
[no] interface usb-modem
User Level
read-write
Context
general
Example
To enter the USB-modem interface context:
G450-001(super)# interface usb-modem
G450-001(super-if:USB-modem)#
Related Commands - IP interface configuration
description (interface),
serial, interface
load-interval, show ip interface brief
Related Commands - Modem configuration
async modem-init-string,

async modem-init-string

Use the async modem-init-string command to change the default modem initialization
string. Use the no form of the command to return the modem initialization string to its default
value.
Syntax
async modem-init-string modem_string
no async modem-init-string
582 Avaya G450 CLI Reference
DOWN
10.3.0.3
255.255.255.0
no timeout
38400 bps
"AT S7=45 S0=2 L1 V1 X4 &c1 E0
Q0"
interface console,
tunnel, interface vlan,
interface console,
Modem configuration – USB modem port
interface fastethernet,
ip address, ip admin-state,
ppp chap-secret
interface loopback, interface
ip broadcast-address,