Remote - Avaya G450 Cli Reference Manual

CLI Commands
Example
The following example establishes a local line loopback on the controller interface:
G450-001(super-controller:5/1)# loopback local line
Related Commands
clear controller
source, ds-mode, fdl, framing,
show controllers,

remote

Use the remote command to reset the far end counters on a T1 line.
Syntax
remote fdl_request_type
Parameters
Parameter
fdl_request_
type
User Level
read-write
Context
interface:Controller (T1)
Example
To reset performance monitoring counters:
G450-001(super-controller:5/1)# remote reset-performance-monitoring-counters
Related Commands
clear controller
source, ds-mode, fdl, framing,
loopback, show
368 Avaya G450 CLI Reference
counters, controller, cablelength
interface
show controllers remote,
Description
The type of
counters
to reset
counters, controller, cablelength
interface
controllers, show controllers
long, cablelength
serial, ip address, linecode
show ds-mode
Possible Values
reset-performance-monitoring-counters,
reset-errored-esf-data
long, cablelength
serial, ip address, linecode
remote, show ds-mode
E1/T1 interfaces
short, channel-group,
(E1), linecode (T1), remote,
short, channel-group,
(E1), linecode (T1),
clock
Default
Value
clock