Keepalive-Icmp Success-Retries - Avaya G450 Cli Reference Manual

Example
To set the source IP address of the keepalive packets to 149.49.78.96:
G450-001(if:FastEthernet 10/2)# keepalive-icmp source-address 149.49.78.96
Related Commands
keepalive-icmp,
success-retries,

keepalive-icmp success-retries

Use the keepalive-icmp success-retries command to set the number of consecutive
successful keepalive packets necessary to set the interface's keepalive status as Up. Using this
command without a parameter resets the success-retry value to the default value.
Syntax
keepalive-icmp success-retries success-retries-number
Parameters
Parameter
success-
retries-
number
User Level
read-write
Context
interface:FastEthernet
Example
To set the number of consecutive successful keepalive packets necessary to set the interface's
keepalive status as up to 2:
G450-001(if:FastEthernet 10/2)# keepalive-icmp success-retries 2
Related Commands
keepalive-icmp,
keepalive-icmp
keepalive-icmp failure-retries,
keepalive-icmp timeout,
Description
The number of successful keepalive packets
required
keepalive-icmp failure-retries,
source-address, show keepalive-icmp
keepalive-icmp interval,
show keepalive-icmp
keepalive-icmp interval,
ICMP keepalive
keepalive-icmp
Possible Default
Values Value
1-32 1
keepalive-icmp timeout,
Issue 1 January 2008 461