Pppoe-Client Persistent Delay - Avaya G450 Cli Reference Manual

pppoe-client persistent delay

Use the pppoe-client persistent delay command to configure the interval between
PPPoE-client dial attempts.
Syntax
pppoe-client persistent delay seconds
Parameters
Parameter
seconds
User Level
read-write
Context
interface:FastEthernet
Example
To configure the interval between ppp.E-client dial attempts as 1 second:
G450-001(super-if:FastEthernet 10/2)# pppoe-client persistent delay 1
Related Commands
encapsulation pppoe, mtu,
pppoe-client persistent
Description
The time in seconds to wait
ppp chap hostname,
max-attempts, pppoe-client
ppp chap password, ppp pap
service-name, pppoe-client wait-for-ipcp
Issue 1 January 2008
PPPoE (PPP over Ethernet)
Possible Default
Values Value
5-10000 30
sent-username,
827