Show Ip Traffic - Avaya G450 Cli Reference Manual

Context
general
Example
To clear the IP counters:
G450-001(super)# clear ip traffic

show ip traffic

Use the show ip traffic command to display IP counters information for a given protocol. If
no protocol is specified information for all protocols is displayed.
Syntax
show ip traffic [protocol_type]
Parameters
Parameter
protocol_type
User Level
read-only
Context
general
Example
To display traffic information for all protocols:
G450-001(super)# show ip traffic
IP statistics:
Received:
5644 total, 4012 local destination
0 bad hop count, 0 packet header errors
0 unknown protocol, 0 address errors
1632 discarded
Fragments:
Description
The type of IP protocol for which to
display information
Possible Default
Values Value
arp,
bootp-dhcp,
icmp, ip,
ospf
Issue 1 January 2008
Counters
249