Ip Rip Authentication Mode - Avaya G450 Cli Reference Manual

Example
To set the authentication string on the VLAN 1 interface to hush-hush:
G450-001(if:Vlan 1)# ip rip authentication key hush-hush
Related Commands
ip distribution access-list,
poison-reverse,
ip protocols

ip rip authentication mode

Use the ip rip authentication mode command to specify the type of authentication used
in RIP Version 2 packets. Use the no form of this command to restore the default value, none.
Syntax
ip rip authentication mode [simple|none]
no ip rip authentication mode
Parameters
Parameter
simple
none
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN (L2-L3,
L3), Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To specify that RIP packets use simple authentication mode:
G450-001(if:FastEthernet 10/2)# ip rip authentication mode simple
ip rip authentication
ip rip rip-version, ip rip
Description
Keyword indicating that the clear text
authentication should be used
Keyword indicating that no authentication
should be used
mode, ip rip default-route-mode,
send-receive-mode, ip rip
ip rip
split-horizon, router rip,
Possible Default
Values Value
Issue 1 January 2008
RIP
show
859