Ip Rtp Compression-Connections - Avaya G450 Cli Reference Manual

CLI Commands

ip rtp compression-connections

Use the ip rtp compression-connections command to control the number of Real-Time
Transport Protocol (RTP) connections supported on the current interface. Use the no form of
this command to restore the default. This command also sets the number of connections in the
non-TCP space, not just RTP.
Note:
This command automatically enables TCP header compression on the current
Note:
interface.
Syntax
[no] ip rtp compression-connections number
Parameters
Parameter
number
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), Dialer (L2, L2-L3, L3)
Example
To allow 48 RTP connections on the Serial interface:
G450-001(if:Serial 3/1:1.1) ip rtp compression-connections 48
Related Commands
clear ip rtp header-compression,
rtp max-period,
compression-connections,
brief, show ip tcp header-compression
504 Avaya G450 CLI Reference
Description
The total number of connections in the
non-TCP space to support on the current
interface
clear ip tcp
ip rtp max-time, ip rtp
show ip rtp
header-compression,
non-tcp-mode, ip rtp port-range,
header-compression,
IPHC header compression
Possible Default
Values Value
3-1000 16
ip rtp header-compression,
ip tcp
show ip rtp header-compression
ip