show queueing
Use the show queueing command to display the priority queueing and WFVQ configuration,
for a specific interface type or interface, or for all interfaces.
Syntax
show queueing [interface_type if_number]
Parameters
Parameter
interface_type
if_number
User Level
read
Context
general
Note:
This command is also used for the FastEthernet interface when traffic shaping
Note:
has been configured.
Example
To display the priority queue size in packets:
G450-001(super)# show queueing
Description
The type of interface
The port number of this interface in
the form: port[:channel_group]
Priority queueing
Possible Values
Default
Value
Serial,
Fast-Ethernet
port: 1, 2
channel_group:
E1: 0-30
T1: 0-23
Issue 1 January 2008
833