Show Ip-Rule - Avaya G450 Cli Reference Manual

Hide thumbs Also See for G450:

Table of Contents

CLI Commands

show ip-rule

Use the show ip-rule command to display the attributes of a specific rule. Leave the

rule_number parameter blank to display all rules.

show ip-rule [rule_number]

ip access-control-list, ip access-control-list/ip-rule, ip qos-list, ip qos-list/ip-rule, ip capture-list,

ip capture-list/ip-rule, ip pbr-list, ip pbr-list/ip-rule

To display information about ip rule 22 in access-control-list 320:

G450-001(ACL 320/ip rule 22)# show ip-rule 22

----- -------- --- ---------------- --------- ----------

Following is an example of the output that appears if

Dos classification: other-attack

708 Avaya G450 CLI Reference

The specific rule for which attributes are

DoS-classification

-------------- ------ --------------

Policy - access control lists

is configured:

Fragment rule