Ppp Authentication - Avaya G450 Cli Reference Manual

Example
To configure the USB interface to offer requesting calling hosts the IP address 192.168.49.2:
G450-001(super-if:USB-modem)# ip peer address 192.168.49.2
Related Commands
async mode interactive,
(interface), speed

ppp authentication

Use the ppp authentication command to select the authentication method used when
closing a PPP server or client session.
Note:
The value set for ppp authentication affects both the USB interface and the
Note:
Console interface, simultaneously.
Syntax
ppp authentication {pap|chap|none|ras}
Parameters
Parameter
pap
chap
ras
none
User Level
read-write
async mode terminal,
(PPP), timeout absolute
Description
Keyword indicating the Password
Authentication Protocol. An unencrypted
password is sent for authentication.
This is the default.
Keyword indicating the Challenge
Handshake Authentication Protocol. An
encrypted password is sent for
authentication
Keyword indicating Remote Access Service
mode is being used for authentication
Keyword indicating that no password is sent
Modem configuration – Console port
ip address, ppp authentication,
Possible
Values
shutdown
Default
Value
Issue 1 January 2008 575