Clear Sig-Group - Avaya G450 Cli Reference Manual

Parameters
Parameter
tgnum
mode
pattern
length
User Level
read-write
Context
sls
Example
To delete an entry for incoming routed string enbloc protocol associated with trunk group 99:
G450-001(super-sls)# clear incoming-routing 99 enbloc
Related Commands
set sls, show incoming-routing,

clear sig-group

Use the clear sig-group command to delete the administration for a given ISDN signaling
group in SLS.
Syntax
clear sig-group sgnum
Description
ISDN (t1isdn or e1isdn or bri) trunk group number
Protocol for receiving incoming digits:
enbloc – All digits in SETUP message
●
overlap – Not all digits available in the SETUP
●
message; some digits delivered in subsequent
INFO message
Incoming alphanumeric string of 1-16 characters
Numeric string of 0-21 digits
show sls, sls
SLS survivability
Possible Default
Values Value
1-2000
enbloc
overlap
0-9
Issue 1 January 2008 947