Telnet Access; Ip Telnet - Avaya G450 Cli Reference Manual

Syntax
set system name [string]
Parameters
Parameter
string
User Level
read-write
Context
general
Examples
To set the name of the system to "G450-HQ":
G450-001(super)# set system name "G450-HQ"
*** Set system name ***
system name set
Related Commands
set system contact,

Telnet access

ip telnet

Use the ip telnet command to enable the Telnet server on all interfaces except the Services
interface. Use the no form of the command to disable the Telnet server.
Note:
For security reasons, this command can only be executed from the Console port.
Note:
Description
The system name string, typed inside quotes.
The name is cleared if you leave this field blank.
set system location
Telnet access
Possible Default
Values Value
Issue 1 January 2008 1135