Show Snmp - Avaya G450 Cli Reference Manual

Example
To set the system to wait 60 seconds before retrying communications:
G450-001(super)# set snmp timeout 60
Related Commands - SNMP access configuration
ip snmp, set snmp
group,

show snmp

snmp view, snmp-server
remote-user, snmp-server
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
show snmp
Use the show snmp command to display SNMP configuration information.
Syntax
show snmp
User Level
read-only
Context
general
Example
To display SNMP configuration information:
G450-001(super)# show snmp
Authentication trap disabled
Community-Access
----------------
read-only
read-write
community, set snmp
retries, show snmp
community,
user, snmp-server view
show snmp, snmp trap
snmp-server informs
Community-String
----------------
*****
*****
retries, show snmp,
timeout, show snmp user,
snmp-server engineID,
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp engineID,
show snmp usertogroup,
snmp-server group, snmp-server
frame-relay,
notifications,
Issue 1 January 2008
show snmp
show
1069