Setting Tcp/Ip Properties In Windows - Avaya G250 Maintenance Manual

Access and login procedures
The names of the dialog boxes and buttons vary on different operating systems and browser
releases. Use your computer's help system if needed to locate the correct place to enter this
information.
The S8300 Media Server uses the same access configuration as an Avaya S8100 Media
Server with a CMC1 or G600 Media Gateway. If you already have a NetSwitcher profile for the
S8100 Media Server (formerly called DEFINITY One), try using that profile first before
configuring a new one.

Setting TCP/IP properties in Windows

TCP/IP administration varies among Windows systems as described below.
Note:
Make a record of any IP addresses, DNS servers, or WINS entries that you
Note:
change when you configure your services computer. Unless you use the
NetSwitcher program or an equivalent, you will need to restore these entries to
connect to other networks.
To check Your Version of Windows:
1. Log in to your laptop, and double-click the My Computer icon on your desktop.
The My Computer window opens.
2. Click Help on the My Computer window's toolbar.
The Help menu opens and displays the version of Windows installed on your laptop.
3. Follow one of the two procedures below, depending on your operating system.
To change TCP/IP Properties and Network Settings (Windows 2000 and XP):
1. Right-click My Network Places on your desktop or under the Start menu in XP.
2. Select Properties to display the Network and Dial-up Connections window.
Windows should have automatically detected the Ethernet card in your system and created
a LAN connection for you. More than one connection may appear.
3. Right-click the correct Local Area Connection from the list in the window.
4. Select Properties to display the Local Area Connection Properties dialog box.
5. Select Internet Protocol (TCP/IP).
6. Click the Properties button. The Internet Protocol (TCP/IP) Properties screen appears.
236 Maintenance for the Avaya G250 and Avaya G350 Media Gateways