Clock Source - Avaya G450 Cli Reference Manual

CLI Commands

clock source

Use the clock source command to configure the clock source for an E1/T1 controller. Use
the no form of the command to return the clock source to the default value of line.
Syntax
clock source {line | internal}
no clock source
Parameters
Parameter
line
internal
User Level
read-write
Context
interface:Controller
Example
To specify that controller number 5 uses an external clock:
G450-001(super-controller:5/1)# clock source line
Related Commands
clear controller
ds-mode, fdl, framing,
remote, show
362 Avaya G450 CLI Reference
Description
Keyword that specifies to use an external
clock
Keyword that specifies to synchronize to the
internal clock
counters, controller,
interface serial,
controllers, show controllers
cablelength long, cablelength
ip address, linecode
remote, show ds-mode
E1/T1 interfaces
Possible Default
Values Value
short, channel-group,
(E1), linecode (T1), loopback,