Avaya G450 Cli Reference Manual page 887

Note:
If you wish to establish a route through the FastEthernet interface on which
Note:
DHCP address negotiation is configured, you must specify the interface type as
the FastEthernet interface.
Note:
When applying tracking to a static route, a PBR next hop, or the DHCP client
Note:
default route, you must specify the same next hop for the object tracker's RTR
(use the next hop command in rtr context).
Note:
Object tracking cannot be configured on Null0 or on a permanent route.
Note:
Parameters
Parameter
ip_addr
mask
next_hop
interface_type
interface_number
cost
preference
permanent
track
track-index
Null0
User Level
read-write
Description
The IP address of the network
The mask of the static route
The next hop address in the network
The interface type
The interface number
The path cost
The preference of the route
Keyword that specifies that the route is not
disabled if the interface is down
Keyword specifying to apply tracking to
monitor the route
The index number of the object tracker
Keyword that creates a static discard route.
Note: Object tracking cannot be configured
on Null0 or on a permanent route.
Routing table configuration
Possible Default
Values Value
1
High, Low
Low
1-50
Issue 1 January 2008 887