Keepalive-Icmp Source-Address - Avaya G450 Cli Reference Manual

CLI Commands
User Level
read-write
Context
interface:FastEthernet
Example
To set the interval between keepalive packets to 5 seconds:
G450-001(if:FastEthernet 10/2)# keepalive-icmp interval 5
Related Commands
keepalive-icmp,
success-retries,

keepalive-icmp source-address

Use the keepalive-icmp source-address command to set the source IP address of the
keepalive packets. Using this command without a parameter sets the source IP address to the
default value, which is the interface's primary IP address.
Syntax
keepalive-icmp source-address source_ip_address
Parameters
Parameter
source_ip_
address
User Level
read-write
Context
interface:FastEthernet
460 Avaya G450 CLI Reference
keepalive-icmp failure-retries,
keepalive-icmp timeout,
Description
The source IP address of the
keepalive packets
keepalive-icmp source-address,
show keepalive-icmp
ICMP keepalive
keepalive-icmp
Possible Default
Values Value
The
interface's
primary IP
address