Show Ip Dhcp-Client Statistics - Avaya G450 Cli Reference Manual

CLI Commands

show ip dhcp-client statistics

Use the show ip dhcp-client statistics command to show the DHCP Client statistics
counters.
Note:
When you use this command in the interface context, the output displays the
Note:
counters of the interface. When you use this command in the general context, the
output displays the sum of all DHCP client counters, for all interfaces on which it
is configured.
Note:
When the
Note:
for the relevant interface are cleared. The global parameters are not cleared.
Syntax
show ip dhcp-client statistics
User Level
read-only
Context
interface:FastEthernet 10/2,
general
Examples
To show the DHCP Client statistics counters in the interface context:
G450-001(config-if:FastEthernet 10/2)# show ip dhcp-client statistics
DHCP client interface statistics:
Tx counters:
Discover
Request
Decline
Release
Rx counters:
Offer
Ack
Nak
292 Avaya G450 CLI Reference
ip address dhcp command is used, the DHCP Client statistics counters
: 1
: 1
: 0
: 0
: 1
: 1
: 0
DHCP client