Ip Pbr-List - Avaya G450 Cli Reference Manual

Parameters
Parameter
list_number
User Level
read-write
Context
interface:Serial (DS1 PPP L2, DS1 PPP L2-L3, DS1 FR-SUB L2, DS1 FR-SUB L2-L3,
USP PPP L2, USP PPP L2-L3), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3, PPP L3),
VLAN (L2, L2-L3), Loopback (L2, L2-L3), Tunnel (L2, L2-L3), Dialer (L2, L2-L3)
Example
To apply PBR list 811 to the current interface:
G450-001(super)# ip pbr-group 811
Related Commands
ip next-hop-list,

ip pbr-list

Use the ip pbr-list command to enter context of the specified PBR list. If the list does not
exist, it is created. Use the no form of the command to suspend the specified PBR list.
Syntax
ip pbr-list list_number
Parameters
Parameter
list_number
Description
The list number of the PBR list
to be applied to ingress packets
of the current interface
ip pbr-list, show ip active-lists,
Description
The list number of the policy list
being entered
Possible
Values
801-899
show ip active-pbr-lists,
Possible
Values
801-899
Policy-based routing
Default
Value
show ip pbr-list
Default
Value
Issue 1 January 2008 767