Set Port Point-To-Point Admin Status - Avaya G450 Cli Reference Manual

set port point-to-point admin status

Use the set port point-to-point admin status command to manage the connection
type of the port.
Syntax
set port point-to-point admin status module/port admin_status
Parameters
Parameter
module
port
admin_status
User Level
read-write
Context
general
Example
To specify that the connection type of port 6/5 is automatically detected:
G450-001(super)# set port point-to-point admin status 6/5 auto
Description
Number of the module
Number of the port on the
module.
You can also specify a range
of ports separated by a dash,
for example, 10/5-6 for both
ETH LAN ports 5-6 on the
front panel.
The connection type of the
port
Possible Values
force-true — specify
that the port is
connected
point-to-point
force-false — specify
that this port is shared
media
auto — try to
automatically detect
the connection type of
the port
Issue 1 January 2008
Spanning tree
Default
Value
1099