Broadcast Relay; Ip Directed-Broadcast; Ip Netbios-Rebroadcast - Avaya G450 Cli Reference Manual

CLI Commands

Broadcast relay

ip directed-broadcast

Use the ip directed-broadcast command to enable net-directed broadcast forwarding.
Use the no form of this command to disable net-directed broadcasts on an interface.
Syntax
[no] ip directed-broadcast
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB L3,
USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2, PPP L2-L3, PPP L3), Tunnel
(L2-L3, L3), VLAN (L2-L3, L3), Dialer (L2, L2-L3, L3
Related Commands
interface fastethernet,

ip netbios-rebroadcast

Use the ip netbios-rebroadcast command to enable the forwarding of NETBIOS packets
on an interface. If no value is provided for direction, the both option is applied as the default
value.
Use the no form of this command to disable forwarding of NETBIOS packets on an interface.
Syntax
ip netbios-rebroadcast [direction]
no ip netbios-rebroadcast
200 Avaya G450 CLI Reference
interface serial, interface vlan, ip netbios-rebroadcast
Broadcast relay