Cos - Avaya G450 Cli Reference Manual

CLI Commands
Example
To enter configuration mode for composite operation 13:
G450-001(QoS 440)# composite-operation 13
G450-001(QoS 440/CompOp 13)#
Related Commands - Packet sniffing
cookie, copy capture-file
policy-based routing, packet
Related Commands - Policy
cookie, destination-ip,
packet sniffing), name, owner,
show list, source-ip,
udp source-port

cos

Use the cos command to set the priority value for the current composite operation. Use the no
form of the command to reset the priority to the default value of no-change.
Syntax
cos {priority | no-change}
no cos
Parameters
Parameter
priority
no-change
User Level
read-write
Context
ip qos-list composite-operation
720 Avaya G450 CLI Reference
ftp, copy capture-file
sniffing), owner,
dscp (policy), dscp-table, icmp,
show composite-operation,
tcp destination-port, tcp
Description
The priority value of the composite operation
Keyword indicating that the priority is not
changed
scp, copy capture-file
show ip capture-list, show upload status
ip-rule (policy, policy-based routing,
show dscp-table,
established, tcp source-port,
Policy - QoS lists
tftp, ip-rule (policy,
show isdn bri
udp destination-port,
Possible Default
Values Value
0-8
link,