Avaya G450 Cli Reference Manual page 700

CLI Commands
Parameter
range
start_port
end_port
User Level
read-write
Context
ip pbr-list ip-rule, ip capture-list ip-rule, ip qos-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 22 applies to all packets whose source port is greater than port number 95:
G450-001(ACL 330/ip rule 22)# tcp source-port gt 95
To specify that rule 22 applies to all packets whose source port is less than or equal to port 95:
G450-001(ACL 330/ip rule 22)# not tcp source-port gt 95
Related Commands - Policy-based routing
destination-ip,
capture-list, source-ip,
Related Commands - Policy
composite-operation, destination-ip,
dscp-table, show isdn bri
destination-port,
Related Commands - VPN
description (ip
icmp, ip crypto-list, ip-protocol,
show ip crypto-list,
700 Avaya G450 CLI Reference
Description
Keyword indicating that a range of ports is
specified
The start of a port range for which to apply the rule
The end of a port range for which to apply the rule
dscp (policy-based routing, packet sniffing,
tcp destination-port,
link, source-ip,
udp source-port
rule), destination-ip, dscp (policy-based routing, packet sniffing,
ip-rule
tcp destination-port,
udp destination-port,
dscp (policy), icmp, show
tcp destination-port,
(VPN), local-address,
udp destination-port,
Policy - access control lists
Possible
Values
VPN), icmp, ip-protocol,
udp source-port
composite-operation,
tcp established, udp
VPN), fragment,
protect crypto map, source-ip,
udp source-port
Default
Value
show ip
show